





CUT AWAY URN FOUNTAIN
The Outside Is Rough, the Inside Is Not
The whole idea is one contrast. The outer shell is rough gray stone, hammered and irregular, the surface of something quarried. A diagonal section of it has been cut away, and behind it is a core of fine concentric ribbing, smooth and even and dark. Rock on the outside, precision on the inside, and the cut edge between them is sharp enough to read as deliberate rather than broken.
Water comes up through a bubbler at the center and over the full rim, which means it runs down both surfaces. Over the ribbed core it catches every line. Over the rough shell it breaks up and scatters. The same water doing two different things on two sides of one object.
Eighteen inches high and just under twenty across, so it is a low wide piece that sits on the ground rather than standing up from it. That suits a lawn edge, a gravel bed or a spot among low planting, where you look down at it and see into the cut.
What You Get With This Cut Away Urn Fountain
-
01
One object, two surfaces.
Rough quarried stone outside, fine concentric ribbing inside, with a clean cut edge between them. The water runs over both and behaves differently on each.
-
02
You look into it.
The diagonal cut means the piece has an inside, which almost nothing else in the category does. From above and from the open side you see the ribbed core.
-
03
Low and wide, eighteen inches high.
It sits on the ground among planting or on gravel rather than standing up out of it, which is a different job from what most fountains do.
-
04
Eighteen pounds, lit, and nothing to plumb.
One person places it anywhere, it recirculates its own water, and it runs from one standard outdoor outlet.
Somewhere you look down into it. A gravel bed, the edge of a lawn, among low planting, or beside a path where you pass close. Point the cut side toward where people come from, because the ribbed core is the reason to buy it and it is invisible from behind. At eighteen pounds you can move it until it looks right. Level ground matters, since a full rim overflow shows a tilt as the sheet failing on the high side.
Cut Away Urn Fountain Size, Weight, and Materials
| Dimensions | 17.9 in. high, 19.7 in. long, 19.7 in. wide, 18.7 lb |
|---|---|
| Material | Resin |
| Finish | Rough gray stone outside, fine ribbed core inside |
| Design | Tapered urn with a cut away shell and a ribbed inner body |
| Pump | Included, recirculating |
| Power | AC plug in, 110V |
| Water flow | Center bubbler with full rim overflow |
| Lighting | LED included |
| Water connection | Self contained, no plumbing required |
| Assembly | Fill it and plug it in |
| Recommended use | Outdoor |
Keeping This Cut Away Urn Fountain in Good Order
Cut Away Urn Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Top it up as the water evaporates and flush the pump every two or three weeks. The ribbed core is the part that shows mineral film, since every lin...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Cut Away Urn Fountain
Is the cut supposed to look broken
What is the ribbing
How big is it really
Which way should it face
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
