Resin Two Bear Cub Animal Outdoor Water Fountain 39 in
- Regular price
-
$219.99 - Regular price
-
$249.99 - Sale price
-
$219.99
- 39.3 in. high, 10.2 in. square footprint
- Fill it and plug it in
- Tree bark and bear fur texture
Couldn't load pickup availability
TWO BEAR CUB FOUNTAIN
Ten Inches Square, and Two Bears On It
Ten and a quarter inches square is the number that makes this one useful. Animal fountains tend to be wide, because the animal sits beside the water rather than on it, and you end up needing two feet of ground. This one stacks instead. The trunk goes up, one cub is at the top looking down, the other is at the base, and the water runs between them through the bark.
So you get a piece with a story in it that still fits a balcony corner, a porch step or the narrow gap beside a door. That combination is rare. Most of what will fit in ten inches is a plain column.
The finish is bark texture on the trunk and worked fur on the cubs, and a cool toned light sits in the hollow base so the bottom of the piece glows after dark with the bears reading as shapes above it. It is rated for indoor use as well.
What You Get With This Bear Fountain
-
01
Ten inches square at the base.
Animal fountains are usually wide. This one goes up instead, so you get the cubs and the trunk in a footprint that fits a balcony or a porch step.
-
02
Two cubs, not one.
One at the top looking down and one at the base, with the water running between them, so the piece has a relationship in it rather than a single figure stuck on a fountain.
-
03
Bark and fur, both worked.
The trunk has real grain in it and the cubs have textured fur rather than smooth cast surfaces, which is what keeps an animal piece from looking cheap.
-
04
Rated indoors as well.
Thirty nine inches on a ten inch square works in an entryway or a room corner, which most animal fountains are too wide to manage.
Close enough to see the cubs, and narrow spots are fine. A porch, a balcony, beside a door, a corner of a patio, the front of a border, or an entryway indoors. It faces one way, so point the cubs toward where people come from. Level ground matters, since water running down bark will favor one side of the trunk on a tilt. Keep the outlet within reach of the cord.
Bear Fountain Size, Weight, and Materials
| Dimensions | 39.3 in. high, 10.2 in. square footprint |
|---|---|
| Material | Resin |
| Finish | Tree bark and bear fur texture |
| Design | Tree trunk with two sculpted bear cubs |
| Pump | Included, self contained |
| Power | AC plug in, 110V |
| Water flow | From the top of the trunk down through the bark |
| Lighting | Cool toned light in the hollow base |
| Water connection | Self contained, no plumbing required |
| Assembly | Fill it and plug it in |
| Recommended use | Indoor and outdoor |
Keeping This Bear Fountain in Good Order
Bear Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Top the base up as the water evaporates and flush the pump every two or three weeks. The bark grain and the fur texture both hold a little debris, ...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Bear Fountain
How much ground does it need
How is it different from your black bear fountain
Can I use it indoors
What color is the light
Ships free from California or New Jersey, and it is covered for three years.
Add to cart