



CARVED 2 TIER FOUNTAIN
Forty Eight Inches With Only Two Bowls
Three tiers at forty eight inches means three small bowls. Two tiers at the same height means a high upper bowl and a genuinely broad lower pool, and the water gets a longer fall between them. That is the trade, and for a lot of gardens it is the better one, because a wide pool at the base gives the piece a footing that a narrow third tier does not.
Both rims are lobed rather than cut as plain circles, so the overflow breaks at each lobe and comes down as separate curving falls instead of one even ring. The pedestal carries carved leaf work up its length, which is the detail you see from close range while the shape is what you read from across a lawn.
Cast concrete in a weathered multi tone stone finish, which means variation in the surface on the day it arrives rather than a flat gray waiting three seasons to get interesting. It assembles on site in multiple pieces.
What You Get With This Carved Concrete Fountain
-
01
Two tiers, not three, at forty eight inches.
A high upper bowl and a broad lower pool rather than three small ones. The water falls further between levels and the piece has a proper base to sit on.
-
02
Lobed rims on both bowls.
The overflow breaks at every lobe and comes down as separate curving falls instead of one continuous ring, which is what you see from across a lawn.
-
03
Carved leaf work on the pedestal.
Detail at close range on the part of the fountain you walk past, rather than ornament on a bowl you only look at from ten feet.
-
04
Weathered multi tone concrete.
Surface variation from the first day instead of a flat gray. Concrete carries on developing color outdoors through the early seasons.
The broad lower pool means it looks right standing on its own with clear ground around it, in the center of a bed, at the crossing of two paths, or on a lawn where you see it from the house. It arrives in multiple pieces and is assembled in place, so level the ground and settle on the position before delivery. Concrete at this size is a two person job and not something you reposition casually once it is built and filled.
Carved Concrete Fountain Size, Weight, and Materials
| Dimensions | 48.4 in. tall |
|---|---|
| Material | Concrete |
| Finish | Weathered stone, multi tone |
| Design | Two tier pedestal with carved leaf detail and lobed rims |
| Pump | Included, recirculating |
| Power | AC plug in, 110V |
| Water flow | Upper bowl into a broad lower pool |
| Lighting | No lighting |
| Water connection | Self contained, no plumbing required |
| Assembly | Multi piece, assembled on site |
| Recommended use | Outdoor |
Keeping This Carved Concrete Fountain in Good Order
Carved Concrete Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Rinse both bowls and flush the pump every two or three weeks through the season. Mineral film collects in the lobes of the rims and in the carved l...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Carved Concrete Fountain
Why two tiers instead of three
What do the lobed rims do
How does it get assembled
Can it stay outside in winter
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
