


















3 TIER WATER FOUNTAIN
A 48-Inch Three-Tier Concrete Fountain
This large concrete fountain stands 48 inches tall, with a widest bowl measuring 30.7 inches across. Compare both measurements with the space in your garden or courtyard before choosing its position. The three tiers and carved details give it a classical look, finished in an aged buff stone effect. We apply water-based paint before it leaves our factory.
The detail sits where classical pieces put it. Fleur de lis motifs run around the widest and most visible part, the lower rim, picked out lighter than the body. The middle bowl is fluted, the top is a ribbed urn, and the column below is a fluted baluster on a stepped round foot. There is no front and no back, so it works in the middle of a lawn or a courtyard approached from any side.
What You Get With This 3 Tier Water Fountain
-
01
Water leaves in separate arcs, not one sheet.
Spouts set around each rim throw the water clear of the bowl below, so you see distinct streams and hear a layered sound rather than a single wash.
-
02
Factory-Applied Water-Based Finish
The aged buff stone-look finish highlights the molded concrete details. We apply the water-based paint in our factory before shipping.
-
03
Forty eight inches changes what it does.
A 3 tier outdoor water fountain at this height anchors the space it stands in instead of decorating a corner of it.
-
04
Symmetrical from every side.
No front, no back. The middle of a lawn, the center of a courtyard or a spot approached from more than one direction all work.
Choose the final position before assembly. One adult can assemble this fountain using its twist-lock fittings, without tools or professional help. As a backyard water fountain it belongs out in the open where it can anchor a lawn rather than tucked against a boundary, and as a lawn fountain it wants a prepared pad or paving under it, since bare soil settles unevenly under this weight inside a season. Keep it out of the main walking paths and run the cord along a wall or a planting bed rather than across one.
3 Tier Water Fountain Size, Weight, and Materials
| Dimensions | Height 48 in. (121.9 cm); widest bowl diameter 30.7 in. (78.0 cm). |
|---|---|
| Material | Concrete |
| Finish | Aged buff stone-look, water-based painted finish. |
| Design | Three tier classical fountain with fleur de lis relief |
| Pump | Included recirculating pump |
| Power | AC plug in, 110V |
| Water flow | Three tier cascade, arcing streams from each rim |
| Water connection | Self contained, no plumbing required |
| Assembly | One-adult assembly; no tools required. |
| Recommended use | Outdoor use; winter protection required. |
Keeping This 3 Tier Water Fountain in Good Order
3 Tier Water Fountain upkeep, in three lines
- Before each use Check the water level and top up as needed. Keep the pump covered with water while it is running.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before freezing weather Unplug, drain the bowls, reservoir and water passages, and store the pump in a dry, frost-free place. Prevent rain and snow from collecting inside the fountain.
Rinse the bowls and wipe the rims with a soft cloth. For light mineral marks, we recommend a diluted mixture of white vinegar and water, followed by thorough rinsing. Avoid abrasive scrubbing. Contact us if marks remain or you need advice on touching up the finish.
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This 3 Tier Water Fountain
How do I install a 3 tier water fountain
How often should I check the water level?
How loud is it
What should I do before freezing weather?
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
