• Concrete Lotus Fountain Tiered Outdoor
  • Concrete Lotus Fountain Tiered Outdoor in garden setting
  • Concrete Lotus Fountain Tiered Outdoor
  • Concrete Lotus Fountain Tiered Outdoor construction and build detail
  • Concrete Lotus Fountain Tiered Outdoor dimensions and size
  • Concrete Lotus Fountain Tiered Outdoor on patio
1 7

Concrete Lotus Fountain Tiered Outdoor

$429.99
$429.99
Shipping calculated at checkout.
  • 39.3 in. high, 26.3 in. wide, 64 lb
  • Required, tiers stack on site
  • Gray matte stone finish with a green cast
Free US shipping from California or New Jersey, no minimum
60-day returns, even if you just changed your mind
3-year warranty
Pump included. No plumbing, just a standard outdoor outlet.
A three tier concrete fountain where the bowl rims are lobed like lotus petals rather than cut as plain circles. Thirty nine inches tall, twenty six across, sixty four pounds of cast concrete.
Concrete Lotus Fountain Tiered Outdoor
Concrete Lotus Fountain Tiered Outdoor in garden setting
Concrete Lotus Fountain Tiered Outdoor
Concrete Lotus Fountain Tiered Outdoor construction and build detail
Concrete Lotus Fountain Tiered Outdoor dimensions and size
Concrete Lotus Fountain Tiered Outdoor on patio

LOTUS LEAF TIER FOUNTAIN

The Bowls Are Shaped as Overlapping Petals

The shape of a bowl rim decides what the water does when it gets there. A plain circular edge sends the overflow down as one even ring. These rims are lobed into overlapping petals, so the sheet breaks at every lobe and comes off the bowl as separate curving falls, one from each petal.

The effect is easiest to see on the middle tier, which is the widest. From the side you read the scallops as shape. From the front you read them as the spacing of the water. It is the same classical pedestal form that has been made for two hundred years, with the one part that changes the water reworked.

Cast concrete in a gray matte finish with a green cast to it. Sixty four pounds assembled and twenty six inches across the widest bowl, which puts it among the pieces you site once and leave. The pump is adjustable, so you can run it as a quiet trickle or push it hard enough to hear from a distance.

Concrete Lotus Fountain Tiered Outdoor in garden setting

What You Get With This Lotus Fountain

  1. 01

    Petal shaped rims, not plain circles.

    The overflow breaks at every lobe, so the water leaves each bowl as separate curving falls instead of one continuous ring. That is the difference you are paying for.

  2. 02

    Twenty six inches across.

    A wide middle bowl gives the falling water somewhere to land and spread, and it is what makes the piece read at a distance rather than looking narrow on its pedestal.

  3. 03

    Sixty four pounds of cast concrete.

    Real weight in a lawn fountain position, nothing to anchor, and a matte gray finish that keeps developing color through the first seasons outdoors.

  4. 04

    Adjustable pump, included.

    Run it as a low trickle near a window or open it up so it carries across a yard. No plumbing to connect and one standard outdoor outlet to run it.

Where to put it

Twenty six inches across needs space around it, so this one wants the center of a bed, the end of a lawn or a courtyard rather than a tight corner. It assembles on site and concrete at sixty four pounds is a two person job, so level the ground and settle the position first. Low planting around the base hides the pedestal foot and makes the piece look sited rather than placed. Keep the outlet within reach of the cord.

Lotus Fountain Size, Weight, and Materials

Dimensions39.3 in. high, 26.3 in. wide, 64 lb
MaterialConcrete
FinishGray matte stone finish with a green cast
DesignThree tier pedestal fountain with lobed lotus petal rims
PumpIncluded, adjustable
PowerAC plug in, 110V
Water flowBreaks at every petal into separate curving falls
LightingNo lighting
Water connectionSelf contained, no plumbing required
AssemblyRequired, tiers stack on site
Recommended useOutdoor
Concrete Lotus Fountain Tiered Outdoor dimensions and size

Keeping This Lotus Fountain in Good Order

Lotus Fountain upkeep, in three lines

  • Every few days Top up. The water must always cover the pump.
  • Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
  • Before the first frost Drain it completely and bring the pump indoors.
Looking after the finish

Rinse the bowls and flush the pump every two or three weeks through the season. Mineral film collects in the lobes of the rims first in hard water ...

  • 3 years Warranty against manufacturing defects
  • 60 days Returns, no restocking fee
  • Free shipping Continental US, from California or New Jersey

Questions About This Lotus Fountain

What makes the rims different
They are lobed into overlapping petal shapes rather than cut as plain circles. Water arriving at a plain rim comes over as one even ring. Here it breaks at each lobe and falls as separate curving streams, which is easiest to see on the wide middle bowl.
How much space does it need
Twenty six inches across the widest bowl, so allow at least a yard of clear ground around it if you want it to look sited rather than crowded. The height is thirty nine inches, which reads well from a seat on a patio or from across a lawn.
Is the flow adjustable
Yes. The pump has an adjustment on it, so you can run a quiet trickle if the fountain sits close to a window or seating, or open it up so the sound carries across a yard.
How do I set it up
The tiers stack on site. Level the ground, seat the pedestal, add the bowls, drop the pump in and fill with a hose. At sixty four pounds assembled it is a two person job, so decide on the position before you start rather than after.

Ships free from California or New Jersey, and it is covered for three years.

Add to cart