



FLUTED 3 TIER FOUNTAIN
Fluted Rims Break One Fall Into Forty
Three tiers is a familiar shape. What is not familiar is what happens at the rims. Each bowl edge is cut into narrow vertical flutes, so the sheet of water arriving at the edge gets split into dozens of separate threads before it falls. You hear it as a finer, higher sound than a plain tiered fountain makes, and you see it as texture rather than a curtain.
The body is cast concrete in a weathered cream tone with a finial on top, and the whole piece carries the proportions of an old estate fountain without the ornament. No cherubs, no scrollwork. The interest is in the fluting and in the way concrete picks up a little color from weather over the first couple of seasons.
At fifty one and a half inches it is a full height concrete tiered fountain, tall enough to hold a front yard fountain spot at the end of a walk, and heavy enough that nobody is moving it once it is filled.
What You Get With This Concrete Tiered Fountain
-
01
Fluted rims, not smooth ones.
The edge of each bowl is cut into narrow channels, so one falling sheet becomes dozens of threads. That is the difference between this and every plain concrete tiered fountain at the same height.
-
02
A finer sound.
Many small falls make a higher, softer water sound than one wide fall does. If the fountain is going near a seating area or a window you leave open, that matters more than the look.
-
03
Fifty one and a half inches of cast concrete.
Full height, real mass, and nothing to anchor. Concrete at this size settles into a garden fountain role rather than sitting on top of it.
-
04
No lighting to wire, no plumbing to run.
The pump is included and recirculates the same water. One standard outdoor outlet and a garden hose to fill it is the whole install.
Three tiers this tall want to be read from a distance as well as up close, so a front yard fountain position at the end of a walk or the center of a lawn bed suits it better than a tight corner. Set it on level ground or a pad that can carry the weight, and assemble it where it is going to live rather than filling it and then moving it. Concrete gains a little patina in the first seasons outdoors, which is usually the point.
Concrete Tiered Fountain Size, Weight, and Materials
| Dimensions | 51.5 in. tall |
|---|---|
| Material | Concrete |
| Finish | Weathered cream stone tone |
| Design | Three tiers with fluted bowl rims and a finial |
| Pump | Included, recirculating |
| Power | AC plug in, 110V |
| Water flow | Splits into many narrow falls at each fluted rim |
| Lighting | No lighting |
| Water connection | Self contained, no plumbing required |
| Assembly | Tiers stack, assemble in place |
| Recommended use | Outdoor |
Keeping This Concrete Tiered Fountain in Good Order
Concrete Tiered Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Rinse the bowls and flush the pump every few weeks through the season. The flutes are where mineral film shows first in hard water areas, and a sof...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Concrete Tiered Fountain
Why fluted rims instead of smooth
Does it have lights
How hard is it to set up
Will it survive winter outside
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
