








ANGLED PILLAR FOUNTAIN
Five Pillars Cut on the Diagonal
Cut a tube straight across and you get a cylinder. Cut it on a diagonal and the opening becomes an ellipse, which holds water on the low side and lets it over on the high one. That is the whole mechanism here, repeated five times at five heights, and it is why the piece has no visible spouts or lips anywhere on it.
The pillars are different heights and lean at slightly different angles, so the outline is irregular rather than a neat stepped stack. From the front you read five diagonal cuts. From the side you read the lean.
Fourteen and a half pounds at thirty nine inches makes this one of the lightest floor fountains in the range, and it is rated for indoor use as well. The cord runs six and a half feet, which gives you some choice about the outlet.
What You Get With This Angled Pillar Fountain
-
01
Angled cuts instead of spouts.
Each pillar top is cut on a diagonal, so the ellipse holds water on the low side and lets it over the high one. No visible lips or spouts anywhere on the piece.
-
02
Five pillars at five heights and angles.
The outline is irregular rather than a neat stepped stack, so it reads as a composition rather than as one part repeated.
-
03
Fourteen and a half pounds.
One of the lightest floor fountains at this height. One person carries it, sets it and brings it in for the winter.
-
04
Warm light in every basin, and rated indoors.
Five lit ellipses after dark, and at this footprint it works in an entryway or a room corner as well as outside.
Front on, since the five diagonal cuts read from the front and flatten from the side. A terrace, a patio corner, beside a door, or an entryway indoors. It needs about thirteen by fourteen inches of ground. At fourteen and a half pounds it will move in real wind, so keep it against a wall or in a corner rather than out in the open, and set it level since angled basins show a tilt as an uneven spill.
Angled Pillar Fountain Size, Weight, and Materials
| Dimensions | 39.4 in. high, 13.4 in. long, 14.2 in. wide, 14.5 lb |
|---|---|
| Material | Resin |
| Finish | Faux dark stone texture |
| Design | Five angled pillars with four cascading basins |
| Pump | Included, recirculating, UL certified |
| Power | AC plug in, 110V, 6.6 ft. cord |
| Water flow | Five tier cascade through angled basins |
| Lighting | Warm light built into each basin |
| Water connection | Self contained, no plumbing required |
| Assembly | Fill it and plug it in |
| Recommended use | Indoor and outdoor |
Keeping This Angled Pillar Fountain in Good Order
Angled Pillar Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Top the basin up as the water evaporates and flush the pump every two or three weeks. The angled cut edges are what meter each spill, so run a soft...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Angled Pillar Fountain
Where does the water come out
How light is it really
Can I use it indoors
How long is the cord
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
