











SLATE FOUNTAIN WITH LED
The Ribs Slow the Water Down, and the Light Comes From the Top
The ribbing is not decoration. Water follows the horizontal channels on the way down instead of falling free, which holds it against the face and controls how fast it travels. What you get is a continuous trickle rather than a splash.
That changes where it can go. Most fountains near four feet are built to be heard across a garden. This one is built to be heard from the chair beside it and nowhere else, which makes it one of the few pieces at this height that works next to a window, a reading spot or a home office. It is rated for indoor use as well, and the photographs of it in a living room are not a stretch.
The light sits in the cap of each column and points down, so a water fountain with led lights like this one lights the water itself rather than throwing a glow into the garden. After sunset you see four lit columns of moving water and very little else, which is the whole reason to buy an outdoor fountain with lights rather than adding a spotlight to a fountain that has none.
What You Get With This LED Water Fountain
-
01
The ribbed face is what makes it quiet.
Guided descent along horizontal channels instead of open falls. A quiet outdoor fountain at fifty inches is rare, because height normally means noise.
-
02
Warm white LED in every column cap.
The light points down the water rather than up at the piece, so after dark you see moving water, not a lit object. Both run from the same cord and the same outlet.
-
03
Rated indoor as well as outdoor.
A slate water fountain this tall usually has to live outside. This one can stand in a hallway, a stairwell or a conservatory and behave the same way.
-
04
Forty six pounds, not two hundred.
Cast resin carries the slate texture and keeps the weight low enough that two people can place it, so the spot is not a permanent decision.
The slate is dark, close to charcoal, so give it something pale behind it. Against a white fence, light render or pale gravel the staggered outline reads clearly. Against a dark hedge or a shaded corner the shape disappears and the lights end up doing all the work. As a patio fountain it is the rare tall piece you can put right beside seating, because the ribbed face keeps it quiet. Level it before filling, since a ribbed face shows a tilt immediately, and keep the basin topped up so the pump is never dry.
LED Water Fountain Size, Weight, and Materials
| Dimensions | 50.7 in. high, 16.9 in. long, 9.8 in. wide |
|---|---|
| Weight | 46.3 lb. |
| Material | Resin |
| Finish | Ribbed slate texture, dark charcoal |
| Design | Four staggered columns with horizontal ribbed channels |
| Pump | Included submersible pump, UL certified |
| Power | AC plug in, 110V |
| Water flow | Guided descent along horizontal channels |
| Lighting | Warm white LED at every column cap |
| Water connection | Self contained, no plumbing required |
| Assembly | Two people recommended, mostly for the height |
| Recommended use | Indoor and outdoor |
Keeping This LED Water Fountain in Good Order
LED Water Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Wipe the ribbed faces with a soft cloth and rinse the basin. The channels hold a little more dust and mineral film than a flat face does, so a soft...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This LED Water Fountain
How quiet is it really
Do the LED lights need separate wiring
Can I really use it indoors
What happens in winter if I leave it outside
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
