





SLIM WALL FOUNTAIN
A Wall Fountain That Does Not Go On a Wall
A wall fountain is the right look for a narrow space and usually the wrong job to take on. Mounting one means drilling into brick or render, finding anchors that will hold thirty pounds of piece plus the water it carries, and hiding a cord down a wall. Plenty of people want the look and stop at the install.
This one gives you the look standing on the ground. The face is a tall ribbed panel in a warm bronze tone, recessed into a smooth frame. The water leaves a lit spout at the top, crosses a small basin, then runs down the full height of the ribbing as a wide curtain into the lower basin. From three feet away it reads as a wall piece. It is holding itself up on a gray plinth.
Eleven inches of depth is the number that makes it useful. It sits against a fence, a render wall, a balcony rail or the side of a house without projecting into the walkway, which a bowl fountain at the same height cannot do.
What You Get With This Freestanding Wall Fountain
-
01
Nothing to mount.
The wall fountain look with no drilling, no anchors, no hunt for a wall strong enough, and no cord to hide. Set it on the ground against whatever surface you already have.
-
02
Eleven inches deep, twelve wide.
It fits a walkway, a balcony or a narrow side return where a piece with a bowl on it would block the path.
-
03
A wide curtain, not a spout.
The water leaves the top, crosses a basin, then spreads across the full width of the ribbed face on the way down. The ribbing is what holds it as an even sheet.
-
04
Warm light in both basins.
The top basin and the bottom one are both lit, so after dark you see where the water starts and where it lands, with the ribbed face glowing between them.
Against something. The piece is designed to be read from the front, so a fence, a render wall, a hedge or the side of the house behind it is what makes it work. A balcony, a narrow side return, a walkway you do not want to lose width in, or the space beside a door are all natural spots. It needs about a foot of depth. Level ground matters here, since a wide curtain over a ribbed face shows a tilt immediately as an uneven sheet.
Freestanding Wall Fountain Size, Weight, and Materials
| Dimensions | 12 in. long, 11 in. deep, 39.3 in. high, 37.5 lb |
|---|---|
| Material | Resin |
| Finish | Smooth faux stone frame with a ribbed bronze toned face |
| Design | Vertical wall style fountain with a wide curtain and two basins |
| Pump | Included, quiet adjustable submersible |
| Power | AC plug in, 110V |
| Water flow | Top spout into a wide curtain down the ribbed face, adjustable |
| Lighting | Warm light in both basins |
| Water connection | Self contained, no plumbing required |
| Assembly | Tool free |
| Recommended use | Indoor and outdoor |
Keeping This Freestanding Wall Fountain in Good Order
Freestanding Wall Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Top the basins up as the water evaporates and flush the pump every two or three weeks. The ribbed face is what keeps the curtain even, so run a sof...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Freestanding Wall Fountain
Does it mount on a wall
How much depth does it need
What does the ribbing do
Is it quiet
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
