









POTTERY BOWL CASCADE
Six Bowls, Alternating Sides All the Way Down
Stack six bowls down the center of a column and the water falls in a straight line. Set them alternately to the left and right and the water has to cross the column six times, which turns a drop into a route. From the front you follow a zigzag. From the side you read how far each bowl projects.
The bowls are a copper brown glaze against a gray stone column, which is two temperatures doing different jobs. The warm bowls carry the movement and the detail. The cool column carries the height and stays out of the way. At fifty three and a half inches that contrast is what makes the piece read from across a yard rather than as one gray shape.
Warm light sits inside each of the six bowls, so at night you get six glowing points stepping down in alternation with the column dark between them. Forty five pounds, tool free, and rated for indoor use as well, which at this height means an entryway or a tall corner.
What You Get With This Pottery Bowl Fountain
-
01
Six bowls on alternating sides.
The water crosses the column six times instead of dropping down a line, so the path is longer than the piece is tall and there is something to follow.
-
02
Copper brown against gray stone.
Two temperatures. The warm bowls hold the detail and the movement, the cool column holds the height, and the contrast is what makes it read at a distance.
-
03
Warm light inside each of the six bowls.
Six glowing points stepping down in alternation after dark, with the column going dark between them.
-
04
Forty five pounds, tool free, rated indoors too.
The bowls seat on the column, you fill it and plug it in. At fifty three inches an indoor rating means an entryway or a tall corner is a real option.
The alternation is a front on effect, so give it a viewing position rather than a spot you walk around. Against a fence, at the end of a covered patio, in a corner, or in an entryway indoors. It needs only about fifteen inches square of ground. Level matters, since bowls set to alternating sides show a tilt as one side filling faster than the other. Something plain behind it keeps the copper bowls reading clearly.
Pottery Bowl Fountain Size, Weight, and Materials
| Dimensions | 53.5 in. high, 15.3 in. wide, 15.7 in. deep, 45 lb |
|---|---|
| Material | Resin |
| Finish | Copper brown pottery bowls on a gray stone column |
| Design | Six tier cascading bowls set to alternating sides of a column |
| Pump | Included, quiet recirculating, UL certified |
| Power | AC plug in, 110V |
| Water flow | Six tier cascade on alternating sides |
| Lighting | Warm light inside each bowl |
| Water connection | Self contained, no plumbing required |
| Assembly | Tool free |
| Recommended use | Indoor and outdoor |
Keeping This Pottery Bowl Fountain in Good Order
Pottery Bowl Fountain upkeep, in three lines
- Every few days Top up. The water must always cover the pump.
- Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
- Before the first frost Drain it completely and bring the pump indoors.
Top the basin up as the water evaporates and flush the pump every two or three weeks through the season. The copper toned glaze shows mineral film ...
- 3 years Warranty against manufacturing defects
- 60 days Returns, no restocking fee
- Free shipping Continental US, from California or New Jersey
Questions About This Pottery Bowl Fountain
Why alternate the bowls
Can it go indoors
How hard is setup
Are the bowls real pottery
Ships free from California or New Jersey, and it is covered for three years.
Add to cart
