• Resin Sandstone Outdoor Wall Water Fountain with Warm
  • Resin Sandstone Outdoor Wall Water Fountain with Warm in garden setting
  • Resin Sandstone Outdoor Wall Water Fountain with Warm LED lit at night
  • Resin Sandstone Outdoor Wall Water Fountain with Warm LED product view
  • Resin Sandstone Outdoor Wall Water Fountain with Warm material texture detail
  • Resin Sandstone Outdoor Wall Water Fountain with Warm on patio
  • Resin Sandstone Outdoor Wall Water Fountain with Warm close up of water flow
1 8

Resin Sandstone Outdoor Wall Water Fountain with Warm LED

$263.99
$250.99
$263.99
Shipping calculated at checkout.
  • 39.4 in. high, 15.7 in. wide, 7.9 in. deep, 24.5 lb
  • Fill it and plug it in
  • Sandstone texture, light brown
Free US shipping from California or New Jersey, no minimum
60-day returns, even if you just changed your mind
3-year warranty
Pump included. No plumbing, just a standard outdoor outlet.
A split sandstone face under a single arched cap, with a sheet of water running down each of two textured channels and warm light set in the arch. Thirty nine inches tall and under eight deep.
Resin Sandstone Outdoor Wall Water Fountain with Warm
Resin Sandstone Outdoor Wall Water Fountain with Warm in garden setting
Resin Sandstone Outdoor Wall Water Fountain with Warm LED lit at night
Resin Sandstone Outdoor Wall Water Fountain with Warm LED product view
Resin Sandstone Outdoor Wall Water Fountain with Warm material texture detail
Resin Sandstone Outdoor Wall Water Fountain with Warm on patio
Resin Sandstone Outdoor Wall Water Fountain with Warm close up of water flow

SANDSTONE WALL FOUNTAIN

Two Sheets of Water Under Two Arches

One arched cap spanning two textured channels, with a division down the middle. The split is what makes it work. A single flat panel is a slab. Dividing the face into two channels under one arch gives you a vertical rhythm and a center line, and the eye reads that as architecture rather than as a lump of stone.

The light sits in the arched cap, at the top where both sheets begin, so after dark you see the arch glowing with the water falling away beneath it. The finish is a light brown sandstone texture, warmer than the gray most wall fountains come in, and it sits better against brick, timber and terracotta.

Seven and nine tenths inches deep. That number is the practical one. It stands flat against a wall or a fence in a walkway without taking a foot of width out of the passage, and it holds a gallon and a half, which is enough to run without constant topping up.

Resin Sandstone Outdoor Wall Water Fountain with Warm in garden setting

What You Get With This Sandstone Wall Fountain

  1. 01

    Two channels under one arch.

    A split textured face beneath a single arched cap, which gives the piece a center line and a rhythm. A flat panel is just a slab.

  2. 02

    Under eight inches deep.

    It stands flat against a wall or a fence without taking width out of a walkway, which is the whole argument for a wall style piece.

  3. 03

    Light brown sandstone, not gray.

    Warmer than the gray most wall fountains come in, so it sits with brick, timber and terracotta rather than only with modern paving.

  4. 04

    Warm light in the arched cap.

    At the top where both sheets begin rather than at the bottom, so you read a glowing arch with the water falling away below it.

Where to put it

Flat against something, front on. A brick wall, a timber fence, the side of a house, a balcony rail, or the end of a walkway. It needs less than eight inches of depth, which is what makes it possible in a passage where a bowl fountain would be in the way. Level ground matters, because two sheet panels show a tilt immediately as one sheet running heavier than the other, and the pairing is what makes the piece work.

Sandstone Wall Fountain Size, Weight, and Materials

Dimensions39.4 in. high, 15.7 in. wide, 7.9 in. deep, 24.5 lb
MaterialResin
FinishSandstone texture, light brown
DesignSplit sandstone water wall with a single arched cap
PumpIncluded, quiet recirculating
PowerAC plug in, 110V
Water flowTwo sheet flow panels, 1.5 gallon capacity
LightingWarm light in the arched cap
Water connectionSelf contained, no plumbing required
AssemblyFill it and plug it in
Recommended useIndoor and outdoor

Keeping This Sandstone Wall Fountain in Good Order

Sandstone Wall Fountain upkeep, in three lines

  • Every few days Top up. The water must always cover the pump.
  • Every 2 to 3 weeks Empty, rinse, wipe the pump screen, refill.
  • Before the first frost Drain it completely and bring the pump indoors.
Looking after the finish

Top the reservoir up as the water evaporates and flush the pump every two or three weeks. It holds a gallon and a half, which is a reasonable amoun...

  • 3 years Warranty against manufacturing defects
  • 60 days Returns, no restocking fee
  • Free shipping Continental US, from California or New Jersey

Questions About This Sandstone Wall Fountain

Why two panels instead of one
A single flat panel is a slab with water on it. Splitting the face into two channels under one arched cap gives the piece a vertical rhythm and a center line, and the eye reads that as architecture. It also means two separate sheets rather than one wide one.
How much depth does it need
Under eight inches. That is what lets it stand flat against a wall in a walkway or on a balcony without taking width out of the space, which is the whole reason to choose a wall style piece.
Is it gray or brown
Light brown sandstone, which is warmer than the gray most wall fountains come in, so it sits with brick, timber and terracotta. We make the same form in gray slate if you want the cooler version.
How often does it need topping up
It holds a gallon and a half, which is reasonable for the size, so less often than a small bowl fountain. Check it every few days in warm weather rather than waiting to notice the level, since a dry pump is a dead pump.

Ships free from California or New Jersey, and it is covered for three years.

Add to cart